Measure Smarter. Build Better.

Free Construction Material Calculators

Estimate concrete volume, landscape material quantities, flooring boxes and wall coverings before you order. Enter your measurements, check the formula and print or share the estimate.

15 calculators

Concrete Calculator

Use this concrete calculator to estimate slab volume in cubic yards, cubic feet or cubic meters. Enter length, width and thickness, then add any measured sections.

Concrete Bag Calculator

Calculate how many bags of concrete mix you need from a measured volume and the mixed yield printed on your product. Results round up to whole bags.

Footing Concrete Calculator

Estimate concrete for rectangular or round footings from their dimensions and quantity. This footing calculator totals volume; it does not size foundations.

Fence Post Concrete Calculator

Calculate concrete for fence post holes using hole diameter, depth and quantity. Subtract the volume displaced by the embedded round or rectangular post.

Brick Calculator

Estimate how many bricks you need for a wall from its net area, brick face size and mortar joints. Subtract openings and choose a separate allowance.

Gravel Calculator

Estimate gravel driveway volume from length, width and finished depth. Use supplier bulk density when you also need an approximate gravel tonnage.

Mulch Calculator

Work out how much mulch you need for a garden bed from its area and mulch depth. Estimate bulk cubic yards or whole bags using the labeled bag volume.

Topsoil Calculator

Estimate how much topsoil you need from the covered area and soil depth. Calculate volume first; add supplier density only when you need a weight estimate.

Landscape Rock Calculator

Calculate landscape rock volume for a measured area and depth. Estimate river rock or decorative stone coverage, with optional weight from supplier bulk density.

Paver Calculator

Estimate how many pavers you need for a patio or walkway from its area, actual paver dimensions and joints. Add a cutting allowance and optional box quantity.

Flooring Calculator

Calculate flooring square footage and whole boxes for laminate, vinyl plank or other boxed flooring. Add measured rooms, exclusions and your chosen waste allowance.

Tile Calculator

Estimate how many tiles you need from surface dimensions, tile face size and grout joint width. Calculate whole tiles and optional boxes with a chosen allowance.

Paint Calculator

Work out how much wall paint you need from net wall area, coat count and labeled coverage. Estimate US gallons, liters and optional whole paint containers.

Wallpaper Roll Calculator

Estimate wallpaper rolls from full-height strips, roll dimensions, trim and straight pattern repeat. Use the actual roll or bolt dimensions on the label.

Deck Board Calculator

Estimate how many deck boards you need from deck size, actual board width, gaps and stock length. This tool counts surface decking, not structural framing.

Choose a construction or home improvement project

Concrete & masonry

Calculate concrete slab volume, concrete bags, footing quantities, fence post concrete and brick counts. Choose the calculator that matches the material you are ordering.

Landscaping

Estimate gravel, mulch, topsoil, landscape rock and patio pavers. Use area and depth for volume; add the actual supplier density when converting material volume to weight.

Flooring & decking

Calculate flooring square footage, floor tile quantities and deck board counts. Estimate whole boxes or stock boards using actual product dimensions and your chosen allowance.

Painting & renovation

Work out how much wall paint or wallpaper you need. Estimate gallons from surface area and coats, or wallpaper rolls from strip lengths and straight pattern repeats.

Measurement guides

Check the estimate before ordering

Our tools use geometry and editable product assumptions. Coverage, compaction and cuts vary. Read our calculation method and verify manufacturer instructions.